Skip to main content

Posts

Showing posts from June, 2013

How to remove Boot.vbs virus from your computer?

Q. How to remove  Boot.vbs virus from your computer? Boot.vbs is an undesirable program that should be removed instantly from the system. Boot.vbs is added by the W32/Isetspy-C worm and is related to the processes dxdlg.exe, wscript.exeand kinza.exe. A. So here is the fix to remove the boot.vbs virus. Steps: 1.    Before performing the following steps, take a backup of the registry and temporary disable the System Restore. 2.    Boot in the safe mode and go to Task Manager to kill the following processes in order: dxdlg.exe
wscript.exe
3.    Type msconfig in the Run box and remove the above processes from the startup list. 4.    Navigate to the following key in the Registry Editor (type regedit in Run), HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon 5.    Now in the right side, right click on Userinit and delete everything except the value “C:\windows\system32\userinit.exe”. 6.    Open My Computer and search and permanently delete the following files dxdlg.exe
wscript.exe
b…

How to remove win32 silly trojan virus??

Q. How to remove win32 silly trojan virus??

A. Following are the solutions to remove the W32.Silly trojan.

Solution 1:
The better solution is to scan your computer with a good updated Anti Virus as this worm can be easily deleted by many of them. Scan your PC with online scanner that will remove the infection. Solution 2:
1.    Disable system restore (My Computer –> Properties –> System Restore –> Turn off system restore on all drives –> Apply).
2.    Restart the computer in safe mode.
3.    Download and install HijackThis.
4.    Run HijackThis and go to Misc Tools –> process manager. Note the paths and kill the following processes (if any): •    CALC
•    calc
•    mscalc.exe
•    startupfolder
•    config_
•    startupfolder.com
•    config_.com 5.    Now go to Misc Tools –> Delete a file on reboot. Provide the same paths as noted above.
6.    Run HijackThis for a system scan and delete all the entries with above names.
7.    Download Smart Virus Remover and select the option of …

Cannot save the attachment. Cannot create file: message.wav. ??

Q. Cannot save the attachment.Cannot create file:message.wav.Right-click the folder youwant to create the file in, and then click.??


A.Do the following:
1. Click My Computer, and then double-click drive C.

2. On the File menu, click New, and then click Folder.
3. Name the folder temp0.
4. Click Start, click Run, type regedit, and then click OK.
5. Locate and then click the following registry key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security\
6. In the right pane, double-click OutlookSecureTempFolder.
7. In the Value Data field, type C:\temp0\ and then click OK.
8. Exit Registry Editor.
9. Restart the computer.

This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator???

Q. This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator."

A: When clicking on a hyperlink in an e-mail, I get this Message : “This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.” I get this message every time that I attempt to use the hyperlink. I am the administrator on this stand alone computer. How do I deactivate this feature so that I activate hyperlinks ?


If you use Outlook 2013, you’ll receive following error message instead of the “restrictions in effect error” message.

This is not “an Outlook error”.However this is a conflict in your browser.!!

Sol 1: Start, click Run, type Regedit in the Open box, and then click OK.Browse to HKEY_CURRENT_USER\Software\Classes\.htmlRight click the value for the .html key and select Modify…Change the value from “ChromeHTML” to “htmlfile” (or from FireFoxHTML to htmlfile)Repeat for .htm, shtml, .xht, .x…

Message stuck in Outbox! Not able to delete the email from outbox.??

Q.Message stuck in Outbox!  Not able to delete the email from outbox.??
A: If you are not able to delete the emails in your outlook program do the following. 

1. Put Outlook in offline mode. 
To do this go to File-> Work Offline or send/Receive. 

2. Now restart Outlook and see if you can delete it (you can try this in combination with method 1). 

3. Don’t forget to put Outlook back On-line again.

4. Try to create a new profile to see if there is some in the pst data file.

5.Try to restart outlook in safe mode using the following command in RUN Window.
outlook /safe.

If you are not able to change the file association.??

Q: If you are not able to change the file association.??
A: 
1. Go to "Start" -> "Run"

2. Write "Regedit" and press on "Enter" button

3. Navigate to:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer

4. In the right side of the screen double click on "NoFileAssociate".

5.Change the value of"NoFileAssociate" from 1 to 0.

6. Close "Regedit".

Your hard drive or floppy drive has a corrupt section (damaged track or sector).!!

Q: Your hard drive or floppy drive has a corrupt section (damaged track or sector).
A temporary operating system or network failure has occurred.
Your network is unavailable, slow, or is corrupting data packets (failure of a router, network card, or noise on the network transmission line).
Your antivirus program may be causing problems accessing certain files.
In the case of a damaged disk, you must save the file to another location (for example, a different drive).
In the case of a failure of the operating system, this can be caused by various memory management


A: Follow these steps.


Method 1: Click "Start", "run"
type dcomcnfg and click OK The screen "component Services" will be exiled. Expand "Component Services"
Click on "Computers" Right Click on "My Computer"
Click on "Properties" Click on "Default Properties" tab On "Default Authentication Level", select "Connect"
On "Default Impersonation …

Add checkbox in your outlook(2010/2013) emails

Add checkbox in your outlook(2010/2013) emails.??To do this: Open the View Tab.Click on view settings.Click New Column button. Create a custom field of the Yes/No type and add it to the view. Move it on the top. Click Other Settings. Enable in-cell editing so you can check (or uncheck) it to mark an item. Return to Outlook. Click in the column you just added to mark a message Note: The actual checkbox may not be visible in the column until you click it.

Plain text emails appear in a white (invisible) font in Outlook 2013.

Plain text emails appear in a white (invisible) font in Outlook 2013.?? Please follow these steps to resolve it!! 1.File > Options > Mail > Stationery and Fonts, then clicking the Font button under Composing and reading plain text messages. The font colour should normally be set to Automatic, and in our case it was inexplicably set to white. Setting it back to Automatic immediately solved the problem. Bizarrely, even though the Font color was set to white (as shown in the above screenshot), you can see that this was not reflected in the preview on either the Font dialog or the preceding Signatures and Stationery dialog. Hope this will work for you as well!!

How to delete PAGEFILE.SYS or PAGING FILE in Windows7

WHAT IS THE PAGEFILE.SYS OR PAGING FILE AND WHY SHOULDN'T I DELETE IT ?The pagefile.sys is the virtual memory file that is saved on your hard drive. Therefore this file can become quite big. Whenever you don’t have enough physical RAM the system can use the virtual RAM to speed up the current process. So, the virtual memory is quite essential for a fast system and it is not recommended to disable it. Even on systems with a lot of RAM you will need this file badly. Actually, the more physical RAM you have, the more virtual memory you should have. As a rule of thumb, you should always have 1.5 times more virtual memory than physical RAM, recommended is 2 times more. As you can see, deleting the pagefile.sys is not a good solution and you should only do it if you need disk space urgently. 
Delete pagefile.sys 1. open up the control panel !